How to fix a steam floor cleaner

0

Steam cleaners heat water then release the resulting steam from a nozzle that funnels the force. The pressure of the steam forces dirt from floors, countertops, mirrors and other hard surfaces. They are environmentally friendly because they use no harsh chemicals, yet still effectively kill mold and bacteria. Although they are relatively simple machines, steam cleaners can suddenly stop working, and may need some easy repairs.


How to fix a steam floor cleaner

0
Share.

Steam cleaners heat water then release the resulting steam from a nozzle that funnels the force. The pressure of the steam forces dirt from floors, countertops, mirrors and other hard surfaces. They are environmentally friendly because they use no harsh chemicals, yet still effectively kill mold and bacteria. Although they are relatively simple machines, steam cleaners can suddenly stop working, and may need some easy repairs.


Step One

Check that the steam cleaner is firmly plugged into the outlet if the unit suddenly loses power. Try plugging the steam cleaner into an alternate wall outlet, in case the first outlet is no longer working. Steam cleaners can be energy hogs, so it is not recommended that they share an outlet with another heavy duty appliance as that may cause a blown fuse. If you are using an extension cord with your steam cleaner, double check that it is rated at least 15 ampere and the cord is 14 gauge. Lower rated extension cords can overheat if used with steam cleaners.


Step Two

Check that there is water in the tank if steam is not coming out. Unplug the steam cleaner before refilling the tank. Once the tank is full of water, prime the pump by pushing up and down on the handle several times to make steam come out.


Step Three

Change the micropad on the steam cleaner if excessive water is coming out on the surfaces you are cleaning. If the micropad is oversaturated with water, it won't be effective. Unplug the unit, then replace the micropad with a dry one.


Step Four

Use a degreaser, such as an all-purpose cleaner on the floor if it is spotty or streaky after cleaning. This is a sign that the build up on the floor may be too thick for the steam cleaner to effectively remove. Wipe up the grease with paper towels, then clean again with the steam cleaner to remove the remaining dirt and grime. If there is a white spot on the floor, the unit has been left too long in one area.


Step Five

Check the length of the handle if you find the steam cleaner too hard to push. The longer the handle, the better leverage you have in pushing the unit.


Step Six

Check that your surfaces can tolerate high heat. If the steam cleaner removed the sheen from your floors, they may be unsealed wood or unglazed ceramic tile. Without a protective coating, these surfaces are too porous for a steam cleaner.


Share.
Share.

Leave A Reply

By continuing to use the site, you agree to the use of cookies. Full Cookie Disclosure...

The cookie settings on this website are set to "allow cookies" to give you the best browsing experience possible. If you continue to use this website without changing your cookie settings or you click "Accept" below then you are consenting to this.

Close