How to maintain your water softening system


How to maintain your water softening system


Abrasive ‘hard’ water currently affects 85% of US and 60% of UK households, carries elevated levels of calcium and magnesium and is the known cause of lime scale build-up.

For homes in some geographical locations, a water softener system is a vital household appliance, and though they can generally last for a long period of time with very little maintenance, it’s advisable to carry out regular checks to keep it functioning optimally.

Step One

Check the Salt Level. Salt is an essential part of the water softening process, as it regenerates the resin beads to prepare them for more softening. Without this process, the beads would remain ineffective.

Step Two

Add Salt Regularly. the amount of salt required can differ from system to system, and this information can ordinarily be found in the owner manual. However, as a general rule salt should be added if the level is under half-full.

Step Three

Know What Kind of Salt to Add. Your water softener will use one of three types of salt: Tablet, Granular, Block. In the majority of cases, this will be determined by the water softener manufacturer, and again, guidelines should be provided in the user manual. However, tablet salt is generally the most common type of salt used, because it dissolves most easily and won’t build up sediment in the brine tank.

Step Four

Carry Out Regular Inspections. You should check your system every 2 – 3 months for one key sign: a solid build-up of salt in the brine tank. This is ‘bridging’, and means that the salt may not be coming into contact with the water, stopping the resin beads from regenerating, and therefore not softening the supply.

Step Five

Break Up Salt Bridges. bridges can be broken up quite easily as a temporary fix using a long broom handle. However, once a bridge has formed for the first time, this will continually happen at a much faster rate, so a thorough clean should be carried out as soon as possible.

Step Six

Clean The Brine Tank. More traditional water softeners (especially electrical), may require cleaning every 6 to 12 months depending on the age and condition of it. However, even though n, it’s a good idea to carry out inspections of traditional electrical every three to four months and, though not mandatory, drain, empty, and clean it out annually. The latest non-electric, block salt softeners should require very little or no maintenance at all certainly for the first 5-10years of life depending on its warranty.


Leave A Reply

By continuing to use the site, you agree to the use of cookies. Full Cookie Disclosure...

The cookie settings on this website are set to "allow cookies" to give you the best browsing experience possible. If you continue to use this website without changing your cookie settings or you click "Accept" below then you are consenting to this.