How to use a T-Max Timer in a tanning bed

0

How to use a T-Max Timer in a tanning bed

0
Share.

A T-Max timer is used in tanning booths. It is a device that allows the managers desk to control the number of minutes the client uses while in the booth. It is usually located close to the tanning bed. The client can start and stop the tanning bed, but cannot change the minutes the manager desk has given, even though there are up and down triangles indicating the addition or subtraction of minutes. The device is very easy to use, for both the client and the employees of the salon.


Step One

Look for the T-Max timer once you enter the tanning booth. It should be located close to the tanning bed. It will be flat against the wall, with a number lit up. This number is the number of minutes you have before the tanning bed automatically starts.


Step Two

Undress and apply your tanning lotion. If you are ready before the tanning bed starts, you may choose to go ahead and start the tanning bed. Press the start button. You may have to hold down for a full second before the bed turns on. The number of minutes you requested should appear on the screen.


Step Three

Lay, or stand depending on the tanning device, in the tanning bed. The T-Max timer will count down the minutes automatically for you. When your time is up, the T-Max timer shuts off the tanning bed automatically.


Step Four

Press the stop button any time you wish to quit the tanning session. This will automatically stop turn off the tanning bed. You will not be able to start the bed again unless you go to the front desk.


Share.
Share.

Leave A Reply

Inline
Inline

By continuing to use the site, you agree to the use of cookies. Full Cookie Disclosure...

The cookie settings on this website are set to "allow cookies" to give you the best browsing experience possible. If you continue to use this website without changing your cookie settings or you click "Accept" below then you are consenting to this.

Close