How to Upholster My Volkswagen Camper’s Seat

0

Having a Volkswagen camper van is lucky indeed. These recreational vehicles have been on the market for a long time, and while you may be fortunate enough to have found one with a solid frame and engine, the interior often looks a bit worse for wear.

Volkswagen campers often have one or two bench seats in the camper portion of the vehicle. Depending upon your model, the shape may vary slightly. With a bit of research, you can find a professional or do-it-yourself solution for reupholstering your Volkswagen camper van seat.


How to Upholster My Volkswagen Camper’s Seat

0
Share.

Having a Volkswagen camper van is lucky indeed. These recreational vehicles have been on the market for a long time, and while you may be fortunate enough to have found one with a solid frame and engine, the interior often looks a bit worse for wear.

Volkswagen campers often have one or two bench seats in the camper portion of the vehicle. Depending upon your model, the shape may vary slightly. With a bit of research, you can find a professional or do-it-yourself solution for reupholstering your Volkswagen camper van seat.


Remove the seat from your camper. There are bolts fastening the seat to the camper. Once you have the seat out in the open, it is much easier to work with.


Remove the old seat cover. Keep as much of the fabric intact as possible, because you can use the old pieces as a pattern for buying and cutting your new fabric. Depending on your model, this might include unbolting the seat from the van or the seat back from the bottom. Take note of how it was originally attached.


Choose and buy your new fabric. Keep durability, pattern and color in mind. Use your old seat covers to see how much new fabric you need. Get a few extra yards, since it's much better to have too much than too little.


Cut out your new pieces based on your old upholstery. Compare every new piece with its corresponding old piece to make sure you have it right before trying to attach it to the seat.


Attach your new pieces to the seat exactly how the old ones were attached. This is often done simply with upholstery staples.


Reinstall the seat into the camper van. Place it where it was before, and bolt it in tightly. If there are seat belts, be careful not to get them stuck under the seat after you have bolted it.


Share.
Share.

Leave A Reply

By continuing to use the site, you agree to the use of cookies. Full Cookie Disclosure...

The cookie settings on this website are set to "allow cookies" to give you the best browsing experience possible. If you continue to use this website without changing your cookie settings or you click "Accept" below then you are consenting to this.

Close