How to reseal a shower tray

0

How to reseal a shower tray

0
Share.

Reseal you shower tray with this simple ‘how to’ guide.


Buy a good quality silicone with a mould inhibitor. I use Dow Corning 785


Use a stanley knife, sharp chisel to remove the existing sealant being careful not to scratch the tray.


Clean all soap residue away from the area that you are applying the seal to, use methalated spirits to degrease thoroughly (not white spirits as this is an oil based product)


Put masking tape either side of the joint that you are about to seal to avoid a messy finish.


Apply the silicone, smooth off with a finger dipped in a solution of washing up liquid and water.


Stand back and admire your workmanship.


Share.
Share.

Leave A Reply

By continuing to use the site, you agree to the use of cookies. Full Cookie Disclosure...

The cookie settings on this website are set to "allow cookies" to give you the best browsing experience possible. If you continue to use this website without changing your cookie settings or you click "Accept" below then you are consenting to this.

Close