Crazy pavers or crazy paving path are unusual and attractive paving stones used for walkways or as decorative elements in the garden. Make your own unique crazy paving path in a variety of shapes and designs using walkway molds and concrete. Customize the look of your walkway with colored tile chips, pebbles and seashells. Glow-in-the-dark sand or pebbles pressed into the surface create a striking glowing walkway.
Step One
Place mold down on the site you want to pave. The soil should be smooth and level without any grass or weeds.
Step Two
Pour the colored gravel and glow-in-the-dark pebbles into the 2-gallon bucket and mix well. These will give the walkway a colorful look both day and night.
Step Three
Pour the concrete into the wheel barrow and add 4.5 pints of water. Stir with the hoe until the concrete has the consistency of modeling clay. Make sure to rinse the concrete off the hoe after stirring the concrete.
Step Four
Shovel the concrete mixture into the cells of the mold. Leave enough space at the top for adding the gravel and sea shells. Rinse off the shovel to keep concrete from hardening on it.
Step Five
Place the mold down next to the completed section and repeat the process until the walk is as long as you want. Allow the sections to harden 4 to 6 hours before curing.
Step Six
Remove the mold and smooth the edges of the molded concrete with a trowel. Smooth the edges all the way around the section and rinse off the trowel.