Table Tennis OR Ping-pong tables are made of particle board that is really just glue mixed with sawdust. This makes it susceptible to water damage that will cause the playing surface to swell where affected and the table to play unevenly. Most ping-pong enthusiasts say the only way to fix this is to replace the damaged board with a new one. However, if that is out of the question, you can get your original table back to usable condition with a little work and a few materials.
Step One
Mix the powder wood putty to a thin, smooth consistency according to the manufacturer's instructions. Apply a very thin coat of the wood putty over the damaged areas; smooth and feather it at a sharp angle with the spatula. Allow this to dry completely before proceeding.
Step Two
Sand down the wood putty to the level of the playing surface. Smooth and feather in the wood putty with the finest grade of sandpaper. Lightly sand and dust the entire surface for the new layer of ping-pong table paint. Wipe the surface with a clean cloth soaked in rubbing alcohol.
Step Three
Carefully apply the ping-pong table paint per the manufacturer's instructions. Apply as many coats as necessary to give the table the proper playing surface.