Fix Your Pet’s Harness
First thing you get to do :
SMASH ! the broken part off the nylon straps.
You can use a hammer, but the plastic is bouncy and can send bits flying all over.
So I used a Vice and squeeeeezed until it broke.
I made sure to place a sheet of fabric over the part so the flying pieces could be contained.
It was VERY satisfying.
Since I was looking to use something that would NOT require sewing, or doing massive research on materials that would stand the test of DOG... The notion of leather straps and metal snaps seemed to fit the bill. The materials I chose : Leather from a sample "book" used for upholstery ( so I knew it would be thick enough) 1" D-rings from the fabric store - 2 were used for this project Brass, Heavy Duty Snaps - 1 set. 1.6cm size.
https://letsfixit.co.uk/wp-content/uploads/gravity_forms/7-360a393bb4f630dd690cefd9d3f75bc2/2012/10/FPM2W54H58P2TDI.LARGE.jpg
https://letsfixit.co.uk/wp-content/uploads/gravity_forms/7-360a393bb4f630dd690cefd9d3f75bc2/2012/10/FPM8N8JH58P2TDY.LARGE.jpg
https://letsfixit.co.uk/wp-content/uploads/gravity_forms/7-360a393bb4f630dd690cefd9d3f75bc2/2012/10/F33IFZOH58P2TDK.LARGE1.jpg