Fix a detached valve from the inner tube of a bike with this step by step guide. One day I ride my mountain bike in the middle of nowhere where I made a flat tyre. No problem I said, I have my pump, patches and glue, so I started fixing. When I opened the tyre I saw that the valve was broken. Civilization was probably 25-30 km away, there was no phone signal so after some swearing I started to look for solutions. After 15 minutes of thinking, I thought of the following solution:
I took off two washers from the brakes, I put glue on the end of the valve, put one washer on the valve and I stuffed the valve and the washer in the inner tube. I spread glue solution on the outside of the tube, I put the other washer over the tube, then I screwed the nut that holds the valve normally. I mounted the tube and the tyre on the wheel. If you like these instructions, please comment! Now, let’s see all the steps.
I stuffed the valve and the washer in the inner tube. I put some glue on the washer side in contact with the tube.
I spread glue solution on the outside of the tube, I put the other washer over the tube
https://letsfixit.co.uk/wp-content/uploads/gravity_forms/7-360a393bb4f630dd690cefd9d3f75bc2/2012/12/tube_4.jpg