Installing KC lights is something you may need to do if you frequently use your truck at nighttime. Whether for work or play, many truck owners choose to install aftermarket light kits for nighttime use. KC lights provide extra light with a variety of different models and all with the classic rough-and-tough KC light look. Whatever the purpose for the installation or model of KC light, you can install KC lights on your truck in a few steps.
Hold the base of the KC lights against the truck bumper and mark the location of the screw holes against the bumper with a white grease pencil.Drill pilot holes through the white grease pencil marks with a power drill and drill bit.
Drill a hole between the two pilot holes in the panel with a power drill and drill bit. The holes should be large enough to accommodate the switch's three electrical wires.Attach the black ground wires coming from the lights to the nuts, securing them to the bumper.
Run a length of red wire from the "supply" terminal on the switch to the truck battery.Splice the included in-line fuse carrier on the red wire running from the truck battery to the switch's "supply" terminal.