If you’re more of a do-it-yourself type of an individual, when it comes to installing false grass, like the one you can get from Easigrass, you’re bound to want to try to install it yourself. Well, the great news is that while the process is rather lengthy, it is not an overly complicated one, as you’ll discover from this article.
Prepare
Before you start with the actual process of installing the grass, you’ll want to make sure that you have enough of the needed materials for this entire project. As such, make sure to take exact measurements of your yard or garden, and discuss with a professional when purchasing the materials.
Get Rid of Current Lawn
For this specific part of the project, it can be helpful if you make sure that you have the right tools on hand, as otherwise, this process can be quite a pain. However, if all you’ve got are a wheelbarrow and spade, it can still be done. Professionals advise to use the edge of the spade, and cut small squares in the grass. Something like ten inches wide and long, and two in depth. If you do it like this, you’ll get rid of the majority of the roots, while the squares should be easy enough to lift from the soil. Keep in mind that this process is probably going to be quite tiring, so prepare loads of time for it, and take as many breaks as you need.
Sand
After the lawn is no longer there, you can proceed to lay the base of sand. For this stage of the process, it’s a good idea to use a ruler, because for this process, you should be as exact as possible. That’s because putting too much sand can lead to a bumpy grass, while too little can mean that there isn’t enough for binding the under base. What you’re looking for is about 75 mm of sand. You can use the ruler for the first part, and then just use your eyes. Remember to also flatten out the sand by using either a plank of wood or long spirit level. If you’ve got a lawn mower, then just use it, because it’s actually the best tool for this part of the project.
Membrane
After the sand is nicely laid out, it’s time to cover it up with a geotextile membrane. This step is not obligatory, but it is a helpful one, because it prevents weeds from growing, which means that it will help your artificial lawn last as long as possible. Essentially, all you’ve got to do here is to roll the sheets of membrane over the sand.
Lay the Grass
Put your planning hat on, because you’re going to need to be quite careful about this part of the project. When laying the carpet, make sure that it’s done in a way that prevents you from cutting too much of it. Also, if you have to join more than one piece, make sure that the pile runs in the same direction for all pieces. It’s best to leave the grass for about 24 hours, as this will allow the crease to fall. After that, stretch the lawn out and anchor it.
Trim
Now, you have to cut the grass using either a Stanley knife or scissors. This is where you make sure that the artificial grass actually fits your lawn. Be sure to measure things twice, so that you don’t cut too much.
Join the Pieces
For this, you’re going to have to start by cutting the edge strip of the manufacturer, and after that, butt the edges together, then fold them back and place the jointing tape with its smooth side facing down. The carpet’s edges should meet at the center of the tape once they are joined. When you apply the adhesive, be sure to do it in a zig zag motion to the rougher side, then you can press the artificial grass into the wet adhesive. After this, place some weight on the seam, so as to make sure that everything sticks together.
Sand
Now it’s time to apply the rest of the kiln dried sand. Make sure to brush as you go, and create depth in layers, rather than in one go. After this is done, be sure to brush the sand into the lawn. Do this right after laying, while it’s not raining, and be sure to brush as vigorously as possible, since this will help the grass to stand upright.
With this, you’re done. As long as you arm yourself with the right tools, information, and plenty of patience, your lawn is going to look like new for years and years to come.
Source:
https://www.artificiallawn.co.uk/installation/how-to-lay-artificial-grass/
How to Lay Artificial Grass: Installation Guide - Let's Fix It
10-electric-fencing-tips-for-your-garden-and-keeping-horses