Chipboard or particleboard is a composite hard material glued together and treated under enormous pressure to make it sturdy and durable. It is often used to make the insides or skeletons of cabinets and other furniture, the bottom layer of counter tops, and inner layer of doors. In these applications it is usually covered with another durable material, such as veneer or laminate, to improve appearance. Although chipboard is made from wood by-products it isn’t solid wood, so driving screws into it can be a little difficult.
Step One
Measure the thickness of your chipboard with a measuring tape and add 2 cm (3/4 inch) to it to find the minimum length of screw that you need. For example, if you have 3.8 cm (1 1/2 inch) thick chipboard, you will need at least 5.6 cm (2 1/4 inch) screws.
Step Two
Mark the spot on the chipboard where you want to insert the screw and hold the chipboard against the surface to which it will be attached.
Step Three
Hold the chipboard screw against the marked spot on the chipboard and push it into the wood with the tip of the screwdriver. Chipboard screws have a coarse thread that can sink into softwood and particleboard.
Step Four
Turn the screwdriver slowly to drive the screw into the chipboard and keep turning until the head is flat against the chipboard.