A band saw is used both in woodworking and butchering because it is a powerful cutting tool. A band saw consists of a long, continuous blade that wraps around two wheels. The main difference between a wood band saw and a meat band saw is the blade. There are many types of band saw blades; some are better for cutting wood and others are better for cutting meat. If you are looking to convert a wood band saw to a meat band saw, then the easiest way is to replace the blade.
Step One
Power off the band saw and unplug it from the socket for safety reasons.
Step Two
Remove the band saw cover to access the wheels and blade of the band saw. Most band saws have knobs holding up the covers; others have screws. Completely remove the knobs or screws to remove the cover.
Step Three
Turn the tension knob on your band saw to release the tension of the blade. Release the tension until the blade moves freely on the wheels.
Step Four
Remove the woodcutting blade from the band saw. Wear work gloves to avoid cutting your fingers while you handle the blade.
Step Five
Attach the meat-cutting blade to the band saw in the same manner in which the woodcutting blade was attached. A meat-cutting blade is usually called a butcher blade and is available anywhere where band saw blades are sold. Handle the blade carefully to avoid injury.
Step Six
Tighten the tension on the blade until the tension knob is fully tightened. Move the blade slightly to test the tension on the blade. If the blade moves freely, then you’ll need to tighten the tension further.
Step Seven
Replace the band saw cover and tighten the knobs or screws that hold the cover in place.
Step Eight
Plug your band saw back into the socket, and you’ll be set to cut meat with your newly converted meat band saw.